• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Bio-Fires - An Eco-Friendly Alternative to Real Fires

Biofires are a warm and cosy way to heat your home without the harmful gas or soot. They are simple to set up and operate - just like an electric fire.

The BARDA contract supports the development of the BioFire emerging CoV panel, a nucleic-acid amplification test to be used with BioFire filmArray Systems to detect of known and emerging human acoronaviruses using nasopharyngeal or swabs and saliva samples.

Eco-friendly

Bioethanol is a green alternative for gas or wood. The fuel is made from plant by-products and utilizes an natural process to convert sugars into alcohol. It offers many advantages over other types of fireplaces, including no harmful emissions and a lower carbon footprint. Bioethanol is a better alternative to other fires as it doesn't produce smoke or soot. It doesn't require a flue, and can be used anywhere in the garden or home.

A multi-drug resistant (MDR) bacteria is among the most serious health threats of our time. Fortunately, new testing methods can aid in identifying MDR bacteria and other infections early enough to prevent further complications. One of these tests is the BioFire FilmArray multiplex PCR system. This test uses a symptom driven approach to identify pathogens that may cause sepsis. The results are accessible within an hour, so doctors can start treatment right away.

The process of Molecular PCR amplifies DNA and RNA molecules to millions or billions of copies. This makes it possible to test small amounts of body fluid or tissue for the presence of specific genetic sequences. It is a valuable instrument for lab professionals, and helps them identify serious illnesses in a timely and cost-effective manner. The BioFire film array PCR system is a revolutionary instrument for diagnosing infectious diseases. It can be used in many locations including laboratories and hospitals.

For tests for respiratory problems, you can apply a swab of alcohol to your nose prior to sending it to the lab. BioFire’s system allows clinicians to react quickly and with a short turnaround time. This means that patients will enjoy better outcomes and spend less time waiting for the results.

The Chanouf Farm Biofire company has created an agroforestry waste recycling unit, that makes use of olive and pear tree waste to make organic charcoal and biomass energy. The products are offered to the general public to replace traditional wood charcoal and coal briquettes with green alternatives. These bio-waste products are also suitable for burning in a Kachelofen-fire which generates radiant heat and is a greener alternative to electric or gas fires.

Clean burning

By using a bio-fire, you not only save energy, but also help the environment. Bioethanol combustion doesn't produce harmful gases like carbon dioxide. Instead, it releases water vapour and heat. This makes it a cleaner and safer option for indoor bioethanol fireplace use.

Ethanol is produced through the fermentation of plant sugars. It is an energy source that is renewable. This means that it can be produced quickly and will not run out like fossil fuels like oil and coal. Bioethanol helps reduce dependence on imports from foreign countries, and the risk of shortages.

Bio-fires are simple to set up and can be installed in existing fireplace openings, or as an independent unit. This makes them a great alternative to wood and gas fires. They also make ideal for offices and homes that do not have chimneys or flues.

When a bio-fire is ignited, a special media is built into the burner to absorb the liquid fuel ethanol while making it ready for combustion. The ethanol fuel burns in the flames, and the vapors are released into the air via the vent. This makes the flames appear more natural and creates a mesmerising beauty that can't be replicated with wood or gas fires.

Another advantage of bio-fires is that they don't require a flue or vent to replenish the oxygen consumed during combustion. They don't emit the carbon monoxide which is released into the room by open fronted gas fireplaces.

The BioFire Respiratory Panel uses multiplex technology that simultaneously tests for 19 respiratory pathogens in less than an hour. This allows doctors to detect and rule out respiratory illness quicker than traditional laboratory tests, which require visits to the patient. This saves time and money for both patients and the health care system.

Safe indoors

Bio-fires can be used indoors safer than real fires, since they don't emit smoke or ash, as well as carcinogenic fumes. The bio-fires don't produce carbon monoxide that can be harmful if inhaled. The bio ethanol fireplace Indoor-ethanol fuel that they use is flammable however, and you should be careful when handling the burner and refuelling your fire. It should be filled only after the burner is switched off and the fire is cool. Any spills must be cleaned up immediately.

The company's diagnostic FilmArray system--BioFire Torch and BioFire 2.0--are simple to use and can run eight different diagnostic panels cleared by the US Food and Drug Administration, three additional panels authorized for emergency use and six environmental test panel. The tests include a revolutionary respiratory panel that has been designed to quickly detect and discriminate between respiratory illnesses such as COVID-19 and the emerging coronaviruses.

The Biomedical Advance Research and Development Initiative, which is part of the US Department of Defense Strategic Access Program, has awarded the COVID-19 panel with a grant. The COVID-19 test is an antigen-based system that allows doctors to differentiate between symptoms caused by COVID-19 and other respiratory infections with the same precision as the rapid antigen tests currently being used.

The company is also developing a SARS-CoV-2 test for its Respiratory Panel 2.1. The multiplexed nucleic acid amplifying test will be available for use with the BioFire FilmArray 2.0 and Torch Systems, and will detect SARS-CoV-2 and 21 other respiratory pathogens in nasopharyngeal or saliva samples within less than one hour. The test will be developed in the shortest timeframe and FDA approval for EUA and 510(k) is expected to be granted in Q3 2020.

Bio-ethanol fuel fireplace flame effect fires are safe to use, but should be kept clear of objects that are combustible, such as pillows, curtains and blankets. They should not be placed near anything that can catch fire. Keep all flammable items away from the fires that cause flames by at least 10 feet. The bioethanol fuel should be stored in a secure, dry location that isn't easily reached by children or pets.

Simple to use

A bioethanol fireplace is simple to operate and doesn't have a flue to be concerned about. All you need is a safe place to put it and some fuel. After you've filled the burner, light it. This will create an appearance of an actual flame. Once the flame is started it will heat the room but with little or no smoke. It will also produce heat like the wood-burning fireplace. Bio fires are easy to maintain, and don't require any servicing, just the odd wipe down.

The BioFire RP2.1 EZ test unlike other tests that employ an syndromic approach to detect the symptoms of common infections it can give results in 45 minutes. The test is designed for patients with upper respiratory symptoms and has a 98% sensitivity rate. The test can detect up to 19 viruses and three bacteria in one test making it an excellent option for the treatment of patients.

The BioFire platform combines multiplex testing, sample preparation and results reporting in one platform. This allows laboratories to simplify their workflow and eliminate the need for a serial approach involving individual and send-out tests. This can result in improved patient outcomes by enabling the correct test to be used first time, and by eliminating the need for expensive tests based on culture. In addition, the BioFire system can identify pathogens and their associated antimicrobial resistance genes on the molecular level, giving data that is more precise than conventional methods.

Molecular diagnostics is increasingly used to improve patient outcomes and care. The BioFire panel RP2.1+ uses an syndromic approach to simultaneously focus on 23 pathogens that are commonly implicated in respiratory infections. The assay can be run on the BioFire FilmArray 2.0 and Torch systems and results are available in approximately 45 minutes.

In the US this test is currently available under FDA Emergency Use Authorization (EUA) and will be made commercially available after the initial DoD demand is met. Additionally, the BioFire Defense Team has developed a fully-automated, sample-to-result assay for the rapid identification of COVID-19. This assay is in development and will be available once initial DoD demands are satisfied.